The Breezaire WKSL 4000 wine cellar cooling unit split system, has a maximum cooling capacity of 1000 cubic feet.
Features:
- Evaporator: 14.25W x 19.75H x 12.38D
- Condenser: 14.25W x 19.75H x 12.38D
- Thermal Capacity (BTU): 4000
- Estimated Max. Bottle Capacity: 4000
- Electrical Req - Evaporator: 115V/1.5 amp
- Electrical Req - Condenser: 115V/7.5 amps
- Also available in 230V/ 50Hz/ 2Phase, please inquire.
- Color: Tan
IMPORTANT INSTALLATION INFORMATION - The WKS4000 can now have a maximum line set of 50 ft. 50-300 lbs. of pressure (using dry nitrogen gas) is necessary for the pressure test for a duration of 6 hours.
Line Set is required between evaporator and condenser for the new units!
WKSL Series wine cellar cooling systems are a simple split system design that are extremely easy to install by a qualified air conditioning or refrigeration service technician. A mechanical line set - basically two copper tubes - connect the two modules. Both units are hard wired - 110 AC volt electrical source. These cooling units arrive uncharged and must be charged with refrigerant during the installation process.
The L series now allows for digital display on your split system.
IMPORTANT INSTALLATION INFORMATION - The WKSL4000 can now have a maximum of 50ft of line set (previously the earlier versions of the WKS4000 allowed for 100ft).
The WKSL2200 & WKSL4000 are also available in 230V/ 50Hz/ 2Phase, please inquire about the WKSL2150 & WKSL3350.
Adjustable Temperature ...
The ideal temperature for storing and aging wine is between 50 and 60 degrees Fahrenheit. Each Breezaire ® wine cellar cooling system includes an adjustable thermostat that makes it possible for the user to precisely control the conditions in the wine cellar. When initially bringing the temperature down to the desired level and in maintaining the target temperature, the Breezaire ® wine cellar cooling system produces a gentle stream of cool air - never a blast of cold air that could subject the wine to abrupt temperature changes.
Please note that where a bottle probe is available, it must be ordered separately.
Automatic Humidity Control...
Humidity must be present in the wine cellar to prevent cork and label deterioration. The Breezaire cooling system is designed to maintain relative humidity in the range of 50 to 75 %,
Vibration Free Operation...
All of Breezaire's ® wine cellar cooling systems are designed and engineered reduce vibration. They are hand assembled in Breezaire's U.S. factory, ensuring perfect assembly with each and every unit.
Ultra Quiet Operation...
Breezaire wine cellar cooling systems perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to the wine cellar a unique experience.
Attractive metal cabinet...
An attractive metal cabinet that blends in with the decor of your cellar area and can be flush mounted to any wall.
Ease Of Installation...
Breezaire's most popular wine cellar cooling systems are completely self-contained modules that are simply mounted in a wall and connected to a standard 115AC source (230V/50Hz also available as special order). No plumbing, complicated wiring or special procedures including the on-site installation of refrigerant are required, but you may want to prepare for a drain line. (Split system requires professional installation by a licensed refrigeration technician).
Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
TRICKY APPLICATION...
The 3000 series and larger can be adjusted to "Cold Air Up" within the wine cellar if only low mounting on the wall is available. Please note the units can not just sit on the floor as you still need access to the drain line underneath the unit. Cold air up/low mounting is not applicable to all cellar environments and not desirable since hot air rises; you are best to speak to one of our representatives prior to ordering . This option is $35, you may also need to make some grill adjustments on site.
The Breezaire units can also be flush mounted to the cellar side or partially mounted into the room, whereas most other cooling units require proper installation only.
Electrical Requirements...
All Breezaire wine cellar cooling units come 115V. 60Hz for North American power consumption.
A dedicated 15 amp circuit (units up to 4000 BTUs) or 20 amp circuit (units from 6000-8000 BTUs) is strongly recommended.
A few models are available for European electrical requirements in 230V, 50Hz. Please see the WKL2150, WKL3350, WKCE2150 and both the Split Systems (WKSL2150 & WKSL3350).
Please enquire about product price and shipping cost to your country.
If you require the cord out the back of the cooling unit, (plugging into room in adjacent warm space) please specify at time of ordering.
Quality Construction...
All Breezaire wine cellar cooling systems are:
- Designed to deliver superior performance
- Constructed using only the highest quality components.
- Hand assembled to assure that the finished product excels in all ways.
